Polyetheretherketone (PEEK)

To secure permanent bone-anchored biostability and eliminate stress-shielding effects in long-term human implants, Evonik’s Vestakeep i4G offers an unreinforced, high-viscosity polyetheretherketone (PEEK) matrix with unparalleled high purity. Featuring a density of 1.30 g/cm³ and compliance with ASTM F2026 and USP Class VI, this implantable grade exhibits a mechanical modulus close to cortical bone. Jucheng Precision, operating under strict ISO 13485 medical device certified systems, specializes in cleanroom molding of Vestakeep i4G. Using mirror-polished, rust-resistant S136 tool steel cavities, we ensure zero particulate contamination and optimal crystallinity, delivering high-purity medical implants verified by Zeiss CMM.

Sustaining dynamic load-bearing fatigue and chemical insolubility inside aggressive deep-well downhole or clinical sterilization environments demands an ultra-stiff, high-viscosity polymer, which Syensqo’s KetaSpire KT-820 delivers through its unreinforced, low-flow polyetheretherketone matrix. Boasting a density of 1.30 g/cm³ and a melt flow rate of 3.0 g/10 min, this highly crystalline grade provides outstanding creep resistance and best-in-class fatigue life compared to high-flow PEEK grades. Jucheng Precision, operating under ISO 13485 and IATF 16949 certified frameworks, specializes in high-temperature molding of KetaSpire KT-820. Supported by high-temperature ceramic heater bands and oil-heated tooling controllers, we ensure complete semi-crystalline phase alignment, delivering structural components verified by Zeiss CMM.

Achieving high mechanical integrity and chemical resistance in complex, thin-walled geometries requiring long flow lengths demands an ultra-flow super-polymer, which Victrex’s PEEK 150G delivers through its unreinforced, low-viscosity polyetheretherketone matrix. Boasting a melt viscosity of 130 Pa·s at 400°C and a melting point of 343°C, this easy-flow grade is designed to fill sub-millimeter profiles without sacrificing the high tensile strength (105 MPa) of pure PEEK. Jucheng Precision, under ISO 13485 and IATF 16949 medical and automotive frameworks, specializes in molding Victrex 150G. Using S136 stainless steel molds, we control its high crystallization variables to deliver flash-free micro-gears and thin-wall connectors verified by Zeiss CMM.

Replacing aerospace-grade titanium and high-strength aluminum alloys in severe, load-bearing dynamic mechanisms without adding weight requires a polymer of unmatched specific stiffness, which Victrex’s PEEK 450CA30 delivers through its 30% carbon fiber reinforced, semi-crystalline polyetheretherketone matrix. Boasting a density of 1.40 g/cm³ and an extreme heat deflection temperature (HDT) of 335°C, this high-performance composite provides a massive flexural modulus of 21,000 MPa alongside inherent electrostatic dissipation (ESD) and near-zero wear. Jucheng Precision, operating under IATF 16949 and ISO 13485 certified frameworks, specializes in molding PEEK 450CA30. Supported by ceramic heater bands and pressurized oil mold heating controllers, we control its anisotropic shrink variables to prevent warpage, delivering structurally flawless parts verified by Zeiss CMM.

Replacing heavy metals like titanium, steel, and aluminum in extreme aerospace and implantable medical environments requires a polymer of unparalleled thermal and chemical stability, which Victrex’s PEEK 450G delivers through its unmodified, high-viscosity polyetheretherketone matrix. Boasting a continuous operating temperature of 260°C and a melting point of 343°C, this high-performance grade provides outstanding fatigue resistance, wear resistance, and near-universal chemical insolubility. Jucheng Precision, operating under strict ISO 9001, ISO 13485, and IATF 16949 certified frameworks, specializes in molding Victrex 450G. Supported by high-temperature ceramic barrels and pressurized oil mold heating controllers, we guarantee complete semi-crystalline phase alignment, delivering structural components verified by Zeiss CMM.

For high-load static systems and deep-draw aerospace components requiring extreme dimensional stability and low thermal expansion, Victrex’s PEEK 450GL30 delivers through its 30% glass fiber reinforced, semi-crystalline polyetheretherketone matrix. Boasting an outstanding heat deflection temperature (HDT) of 328°C under 1.8 MPa and a density of 1.51 g/cm³, this structural grade offers an elastic modulus of 11,500 MPa and excellent chemical resistance. Jucheng Precision, under ISO 9001, ISO 13485, and IATF 16949 certified frameworks, specializes in molding PEEK 450GL30. Backed by 35+ advanced injection presses and five-axis CNC-machined H13 tooling, we control its anisotropic shrink variables to prevent warpage, verified by Zeiss CMM.