Plastic Molding Insights

Read expert analyses on defect troubleshooting and materials. Have a complex design? Let our engineers review your project specifications today.

Consult Our Molding Specialists →

Low pressure molding setup surrounds assembly

Low-Pressure Molding: Which Settings Matter Most?

Low-pressure molding process parameters are grade-, tool-, and assembly-specific. The

Encapsulated connector shows interface defects

Low-Pressure Molding Defects: Trace the Interface

Low-pressure molding defects are easiest to diagnose when the encapsulated

Low-Pressure Molding Design Starts at the Interface

Low-pressure molding design guidelines begin with the assembly, not the

Engineer compares encapsulated electronics

Choose Low-Pressure Molding Material by Failure Risk

Low-pressure molding material selection is a substrate-and-risk decision, not a

Fast Fill Is Not the Window: Prove Stability

A high-speed injection molding process window is not a single

Engineer compares resin pellets and parts

Resin Choice for High-Speed Molding Starts Here

For high-speed injection molding, resin selection should begin with the

Fast Fill, New Defects? Diagnose the Cause

High-speed injection molding defects often appear when faster filling exposes

Cold Runners: Where the Scrap Comes From

Cold-runner material waste comes from polymer that solidifies in the

Technician checks hot runner connections

Keep Hot-Runner Maintenance From Becoming Scrap

Hot-runner mold maintenance is most effective when it is tied

Put Our Molding Expertise to the Test

Read our insights and see how they apply to your custom parts. Share your design files with our technical engineering team today for a free moldability review and a competitive production cost estimate.

SUBMIT YOUR DESIGN FOR FREE REVIEW