Plastic Molding Insights

Read expert analyses on defect troubleshooting and materials. Have a complex design? Let our engineers review your project specifications today.

Consult Our Molding Specialists →

Robot Cable Overmolding: Where Strain Relief Starts

Robot cable overmolding is most useful at a defined termination

Can a Molded End-Effector Carry the Load?

Injection molded robot end effector parts can work when the

When Does a Robot Gripper Need an Overmold?

A robot gripper needs an overmold when the contact surface

Low pressure molding setup surrounds assembly

Low-Pressure Molding: Which Settings Matter Most?

Low-pressure molding process parameters are grade-, tool-, and assembly-specific. The

Encapsulated connector shows interface defects

Low-Pressure Molding Defects: Trace the Interface

Low-pressure molding defects are easiest to diagnose when the encapsulated

Low-Pressure Molding Design Starts at the Interface

Low-pressure molding design guidelines begin with the assembly, not the

Engineer compares encapsulated electronics

Choose Low-Pressure Molding Material by Failure Risk

Low-pressure molding material selection is a substrate-and-risk decision, not a

Fast Fill Is Not the Window: Prove Stability

A high-speed injection molding process window is not a single

Engineer compares resin pellets and parts

Resin Choice for High-Speed Molding Starts Here

For high-speed injection molding, resin selection should begin with the

Put Our Molding Expertise to the Test

Read our insights and see how they apply to your custom parts. Share your design files with our technical engineering team today for a free moldability review and a competitive production cost estimate.

SUBMIT YOUR DESIGN FOR FREE REVIEW