PEEK-Victrex PEEK 150G
Đạt được tính toàn vẹn cơ học cao và khả năng chống hóa chất trong các hình dạng phức tạp, thành mỏng đòi hỏi chiều dài dòng chảy dài đòi hỏi một siêu polymer có độ chảy cực cao, mà PEEK 150G của Victrex cung cấp thông qua nền polyether ether ketone không gia cường, độ nhớt thấp. Với độ nhớt nóng chảy 130 Pa·s ở 400°C và điểm nóng chảy 343°C, cấp độ dễ chảy này được thiết kế để điền đầy các cấu trúc dưới milimet mà không làm giảm độ bền kéo cao (105 MPa) của PEEK nguyên chất. Jucheng Precision, trong khuôn khổ ISO 13485 và IATF 16949 về y tế và ô tô, chuyên ép phun Victrex 150G. Sử dụng khuôn thép không gỉ S136, chúng tôi kiểm soát các biến số kết tinh cao để mang lại các bánh răng vi mô không có ba via và đầu nối thành mỏng được kiểm tra bằng CMM Zeiss.
Victrex PEEK 150G Thin-Wall Flow & Structural Profile
Victrex™ PEEK 150G is an unreinforced, high-flow semi-crystalline Polyetheretherketone resin, certified to deliver outstanding melt flow properties and robust mechanical stiffness under ASTM/ISO standards:
| Physical & Strength Parameter | Lexan 150G Standard Metric | Precision Molding Advantage |
|---|---|---|
| Melt Viscosity | Ultra-Low 130 Pa·s (at 400°C) | Enables smooth, low-pressure cavity filling of complex thin-walled medical connectors and micro-gears without short-shot defects. |
| Yield Strength | Tensile Stress at Yield 105 MPa | Retains outstanding structural stiffness and metal-like mechanical load-bearing capacity even in unreinforced configurations. |
| Structural Ductility | Tensile Elongation at Break 25 – 30% | Provides exceptional structural elongation and dynamic impact toughness compared to standard glass-filled grades, preventing brittle failure. |
Micro-Precision Process Adaptability for Easy-Flow PEEK 150G
With low melt viscosity and integrated high-flow kinetics, PEEK 150G processes predictably inside extremely tight mold cavities:
| Loại Quy trình Đúc | Process Compatibility & Operational Details |
|---|---|
| Thin-Wall Structural Enclosures | Excellent. The primary process for PEEK 150G. Perfect for sub-millimeter medical connector pins, aerospace conduit guides, and diagnostic cuvettes. |
| Micro-Precision Gears & Components | Excellent. Highly optimized for manufacturing sub-millimeter micro-helical gears, medical diagnostic rotors, and orthopedic target pins. |
| Multi-Cavity Automated Fast Runs | Excellent. Easy-flow characteristics support rapid, high-pressure injection molding with highly uniform weight and dimensional replication. |
PEEK-Victrex PEEK 150G Dynamic Molding Processing Matrix
Molding an ultra-high fluidity, semi-crystalline super-polymer like PEEK 150G requires high thermal boundaries and micron-level parting lines to prevent flashing:
Micron-Level Flash Control (Tooling Precision)
Because PEEK 150G has exceptional flow capabilities (melt viscosity 130 Pa·s), molten resin can seep easily into minor mold gaps, causing unsightly flashing. Jucheng’s tooling division uses 5-axis CNC machines to achieve micro-tolerances, keeping mold parting clearances strictly within 0.005mm on premium S136 stainless steel mold cavity blocks heat-treated to 52 HRC.
Gia nhiệt khuôn bằng dầu áp lực (Kiểm soát kết tinh)
To secure the proper semi-crystalline phase (giving PEEK its signature opaque beige color and stiffness), mold temperatures must be maintained continuously at 160°C–200°C (320°F to 392°F) using pressurized oil-heating controllers. Cold molds cause the melt to freeze amorphous, turning parts translucent brown and mechanically weak.
Desiccant Pre-Drying Protocol
While PEEK absorbs minimal water, moisture causes hydrolytic splay and weld line degradation. We desiccant-dry PEEK 150G resin at 150°C (302°F) for 3–4 hours, keeping internal moisture below 0.02% to secure optimal molecular bonds.
Melt and Gate Optimization
Melt temperatures are strictly kept between 360°C and 400°C (680°F to 752°F) using ceramic heater bands. To prevent high shear heating and cosmetic splay near sub-millimeter gates, our engineering team optimizes hot-runner gate geometries during the DFM phase.
Key Application Fields for PEEK-Victrex PEEK 150G
- Medical & Dental Devices (ISO 13485 Certified): Thin-walled dental healing caps, surgical spinal components, drug delivery connectors, micro-fluidic diagnostic valves, and surgical tool parts.
- Aerospace & Semiconductor Infrastructure: Multi-pin aerospace connectors, dynamic cable guides, chemical etching rings, vacuum chamber fittings, and micro-actuator gears.
- Automotive Powertrains & Dynamics (IATF 16949): Specialized sub-gate oil seal rings, dynamic thrust washers, micro steering column gears, and specialized sensor housings.
Properties
| Mật độ | 1.3 g/cm³ |
| Melt Viscosity (400°C) | 130 Pa·s |
| Tensile Modulus (23°C) | 4,100 MPa |
| Tensile Stress at Yield (23°C) | 105 MPa |
| Tensile Strain at Break (23°C) | 25 - 30 % |
| Flexural Strength (yield, 23°C) | 178 MPa |
| Flexural Modulus (23°C) | 3,900 MPa |
| Độ bền va đập Charpy có khía (23°C) | 4.2 kJ/m² |
| Notched Izod Impact Strength (23°C) | 4.0 - 5.0 kJ/m² |
| Nhiệt độ nóng chảy | 343 °C |
| Nhiệt độ chuyển hóa thủy tinh (Bắt đầu) | 143 °C |
| Heat Deflection Temperature (HDT @ 1.80 MPa, Unannealed) | 156 °C |
| Heat Deflection Temperature (HDT @ 1.80 MPa, Annealed) | 167 °C |
| Độ co rút khuôn tuyến tính (Hướng dòng chảy) | 1 % |
| Linear Mold Shrinkage (Cross Direction) | 1.3 % |
| Kích thước chi tiết tối đa | 600 x 400 mm |
| Minimum Part Size (Micro Molding limit) | 0.1 x 0.1 mm |